[Updated Dec 2022] Free Cisco 350-601 Exam Dumps Test Online, Free Real 350-601 Exam Questions
The latest 350-601 exam dumps ensure a successful pass on the Cisco (DCCOR) exam, so we’ve updated you with the latest 350-601 exam dumps to help you learn.
| dumps version | total questions | update time |
| 350-601 exam dumps | 152 | 2020.11.12 |
| latest 350-601 exam dumps | 415 | 2022.11.08 |
When you are preparing for the most critical Cisco 350-601 certification exam, it is important to complete your syllabus, but at the same time, it is very important to use your time effectively. Choosing the right 350-601 dumps will do more with less. Please go to https://www.pass4itsure.com/350-601.html Study the updated Cisco 350-601 exam dumps questions to test the skills. Practice Cisco 350-601 exam-free dumps questions below.
Updated Cisco 350-601 pdf free download, latest drive google
[2022.12] Cisco 350-601 dumps pdf free https://drive.google.com/file/d/16oBPP4pOEYf0GwOx7B-VRTJv-ge5fQVI/view?usp=share_link
New 350-601 (DCCOR) free dumps exam questions
latest question 1:
Which virtual MAC address is the default for HSRP version 2 group 10?
A. 0000.5E00.0110
B. 0000.0C9F.F010
C. 3719.0351.1C0A
D. 0000.0C9F.F00A
Correct Answer: D
latest question 2:
An engineer needs to install a new package on a Cisco Nexus 9000 Series Switch. What is the impact of running the install commit command on the switch?
A. The switch is restarted after the upgrade is complete.
B. The package is used after the switch is restarted
C. The package is used in the running configuration.
D. The previous package that was in use is deleted from boot flash.
Correct Answer: B
latest question 3:
An engineer must implement the FCoE on the Cisco Nexus 9000 Series Switch-based infrastructure. The deployment will contain dual-homed fabric extenders and must support jumbo frames with port channels. Which two sets of actions complete the configuration? (Choose two.)
A. Create a virtual Fibre Channel Interface. Bind vFC to the physical interface.
B. Configure the interface with MTU 9516. Disable the feature NPIV.
C. Create a dedicated VSAN for FEX. Bind VSAN to FEX uplinks.
D. Execute FCoE enable-fex. Configure FEX uplinks with MTU 9216.
E. Create an FCoE switch profile. Enable config sync.
Correct Answer: AD
latest question 4:
What are two recommended design choices in a topology for multipathing iSCSI traffic? (Choose two.)
A. two NICs bonded together on the initiator
B. dual initiators to a single target with bonded interfaces
C. initiators and targets in separate subnets
D. dual initiators to dual targets
E. single initiator to dual targets
Correct Answer: BC
latest question 5:
Refer to the exhibit.
Which two Cisco UCS components are upgraded as a result of the configuration? (Choose two.)
A. adapters
B. board controller
C. IOMs
D. BIOS
E. Cisco UCS Manager
Correct Answer: CE
latest question 6:
A customer data center is configured for the distribution of user roles, call home, and NTP. The data center was split into two geographically separate locations called DC1 and DC2. The requirement is for the user role configurations to be distributed in DC1 and for NTP and call-home features to be constrained to DC2.
Which two configuration sets must be used to meet these requirements? (Choose two.)
A. Option A
B. Option B
C. Option C
D. Option D
E. Option E
Correct Answer: DE
This is a confusing question actually. But I selected DE because they have “CFS region x”. configuration without keyword region should not be accepted on the switch. Please test that on a nexus switch.
latest question 7:
DRAG DROP
An engineer is implementing security on the Cisco MDS 9000 switch.
Drag and drop the descriptions from the left onto the correct security features on the right.
Select and Place:
Correct Answer:
Fabric Binding:
-Uses the Exchange Fabric Membership Data Protocol
-Prevent unauthorized switches from joining the fabric or disrupting current fabric operations
Port Security:
-Can be distributed via fabric services
-Allows a preconfigured set of Fibre Channel devices to logically connect to SAN ports.
latest question 8:
Which configuration generates a Syslog message when CPU utilization is higher than 60%?
A. event manager applet HIGH-CPU event SNMP oid 1.3.6.1.4.1.9.9.109.1.1.1.1.6.1 get-type exact entry-op gt 60 poll-interval 5 action 1.0 syslog priority notifications msg “CPU high”
B. event manager applet HIGH-CPU event snmp oid 1.3.6.1.4.1.9.9.109.1.1.1.1.6.1 get-type exact entry-op lt 60 poll-interval 5 action 1.0 Syslog priority notifications msg “cpu high”
C. event manager applet HIGH-CPU event snmp oid 1.3.6.1.4.1.9.9.109.1.1.1.1.6.1 get-type next entry-op gt 60 poll-interval 5 action 1.0 syslog priority notifications msg “cpu high”
D. event manager applet HIGH-CPU event snmp oid 1.3.6.1.4.1.9.9.109.1.1.1.1.6.1 get-type next entry-op lt 60 poll-interval 5 action 1.0 syslog priority notifications msg “cpu high”
Correct Answer: A
latest question 9:
DRAG DROP
Refer to the exhibit. An engineer must monitor the Ethernet port and the corresponding VLAN traffic for the hyper4 device The SW3 device is a Cisco Nexus 7000 Series Switch. Drag and drop the code snippets from the right into the boxes in the configuration to meet these requirements.
Select and Place:
Correct Answer:
latest question 10:
A small remote office is set to connect to the regional hub site via NSSA ASBR. Which type of LSA is sent to the remote office OSPF area?
A. type 7 LSA
B. type 3 LSA
C. type 1 LSA
D. type 5 LSA
Correct Answer: A
latest question 11:
Refer to the exhibit. Which feature set must be used to configure switch 2 to establish a VSAN trunk between switch 1 and switch 2?
A. F Port Trunk Mode Passive
B. N Port Trunk Mode Active
C. NP Port Trunk Mode Auto
D. E Port Trunk Mode On
Correct Answer: D
latest question 12:
What are two requirements when planning a Cisco HyperFlex All Flash standard cluster installation using three HX240c M5 servers? (Choose Two)
A. If the Jumbo MTU option in the HyperFlex installer is enabled, then jumbo frames do not have to be enabled on the upstream switches.
B. The hypervisors must be installed on Cisco FlexFlash SD cards.
C. If the Jumbo MTU option in the HyperFlex installer is enabled, then jumbo frames must also be enabled on the upstream switches.
D. The cluster deployment type must support a mix of HDD and SSD.
E. The servers must be discovered, unassociated, and connected to each fabric interconnect.
Correct Answer: CE
latest question 13:
Refer to the exhibit.
A host with a source address 10.10.10.10 sends traffic to multicast group 239.1.1.1. How does the vPC switch forward the multicast traffic?
A. If multicast traffic is received on Switch1 over the vPC peer link, the traffic is dropped
B. If multicast traffic is received on Po10 Switch1, the traffic is forwarded out on Po1 and Po20
C. If multicast traffic is received on Po11 Switch2, the traffic is forwarded out only on Po20
D. If multicast traffic is received on Po11 Switch2, the traffic is dropped.
Correct Answer: D
latest question 14:
AN engineer enters these commands while in EEM on a Cisco Nexus 9000 Series Switch.
1. event manager applet Backup-config
2. event timer watchdog time 1800 name timer
3. event CLI match “copy running-config startup-config”
what is the result of applying this configuration?
A. It saves the running configuration every 1800 seconds.
B. It generates an error because no action is mentioned.
C. It executes the copy running-config startup-config command.
D. It blocks the copy running-config the startup-config command.
Correct Answer: B
latest question 15:
Refer to the exhibit.
What is the result of implementing this configuration?
A. The Fibre Channel interface is configured for synchronization distribution.
B. The Fibre Channel interface is configured for SPAN.
C. The Fibre Channel interface is configured for source distribution.
D. The Fibre Channel interface is configured for FSPF.
Correct Answer: B
Where can I get the latest version of 350-601 DCCOR exam dumps?
The Pass4itsure team uses professional knowledge and experience to provide 350-601 questions and answers for those preparing to take the exam. The 350-601 exam questions provided by Pass4itsure are very accurate. Pass4itsure can ensure that you always have the latest version of the Cisco 350-601 test preparation and easily obtain certification.
Try using the ones listed below:
latest Pass4itsure Cisco 350-601 pdf free share https://drive.google.com/file/d/16oBPP4pOEYf0GwOx7B-VRTJv-ge5fQVI/view?usp=share_link
latest Pass4itsure full Cisco exam dumps free share https://www.exampass.net/?s=cisco
P.S
The latest Cisco 350-601 exam dumps, 350-601 exam questions, and the most professional guidance will help you prepare for the Cisco CCNP 350-601 exam. With the help of https://www.pass4itsure.com/350-601.html(Q&As: 415), your preparation will be more efficient.
