[2020.8] Microsoft 70-741 Practice Questions, Free 70-741 Dumps
Microsoft 70-741 practice questions are essential for passing the exam! Where you stand with our free Microsoft 70-741 practice questions. Pass4itsure strongly advise everyone to review them before attending the Microsoft 70-741 exam. Go https://www.pass4itsure.com/70-741.html Q&As: 291.
[Latest Updated] Free Microsoft Certified Solutions Associate 70-741 Exam Questions
Practice the actual 70-741 exam, below you can find all the Labs that are needed in order to pass the 70-741 exam.
70-741 exam dumps are frequently updated for passing the exams quickly and hassle free!
QUESTION 1
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains
a unique solution. Determine whether the solution meets the stated goals.
Your network contains an Active Directory domain named contoso.com. The domain contains a DNS server named
Server1. All client computers run Windows 10.
On Server1, you have the following zone configuration.
You need to ensure that all of the client computers in the domain perform DNSSEC validation for the fabrikam.com
namespace.
Solution: From a Group Policy object (GPO) in the domain, you add a rule to the Name Resolution Policy Table
(NRPT).
Does this meet the goal?
A. Yes
B. No
Correct Answer: A
The NRPT stores configurations and settings that are used to deploy DNS Security Extensions (DNSSEC), and also
stores information related to DirectAccess, a remote access technology.
Note: The Name Resolution Policy Table (NRPT) is a new feature available in Windows Server 2008 R2. The NRPT is a
table that contains rules you can configure to specify DNS settings or special behavior for names or namespaces.
When
performing DNS name resolution, the DNS Client service checks the NRPT before sending a DNS query. If a DNS
query or response matches an entry in the NRPT, it is handled according to settings in the policy. Queries and
responses that do not match an NRPT entry are processed normally.
References: https://technet.microsoft.com/en-us/library/ee649207(v=ws.10).aspx
QUESTION 2
On a DNS server that runs Windows Server 2016, you plan to create two new primary zones named adatum.com and
contoso.com. You have the following requirements for the zones:
Ensure that computers on your network can register records automatically in the adatum.com zone.
Ensure that records that are stale for two weeks are purged automatically from the contoso.com zone.
What command should you run? To answer, select the appropriate options in the answer area.
Hot Area:
QUESTION 3
You have an IP Address Management (IPAM) server named Server1 that runs Windows Server 2016. You have five
DHCP servers. Server1 manages all of the DHCP servers.
On Server1, an administrator uses Purge Event Catalog Data to remove all of the events from the last 30 days.
You need to view all of the lease requests that were denied during the last two days.
What should you do?
A. On each DHCP server, run the \Microsoft\Windows\Server Manager\CleanUpOldPerfLogs scheduled task, and then
review the event catalog on Server1.
B. On Server1, run the Purge Event Catalog Data action and then open Event Viewer on Server1.
C. Review the log data in C:\Windows\System32\ipam\Database on Server1.
D. On each DHCP server, review the DHCP Server operational event log.
Correct Answer: C
QUESTION 4
You have the servers configured as shown in the following table.
You need to configure Server4 to provide Internet access to the computers on the network.
Which three actions should you perform in sequence? To answer move the appropriate actions from the list of actions to
the answer area and arrange them in the correct order.
Select and Place:
Correct Answer:
QUESTION 5
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not
appear in the review screen.
Your network contains an Active Directory domain named adatum.com. The domain contains two DHCP servers named
Server1 and Server2. Server1 has the following IP configuration.
Server2 has the following IP configuration.
Some users report that sometimes they cannot access the network because of conflicting IP addresses.
You need to configure DHCP to avoid leasing addresses that are in use already.
Solution: On Server1, you modify the EndRange IP address of the scope.
Does this meet the goal?
A. Yes
B. No
Correct Answer: A
QUESTION 6
You have a Hyper-V server named Server1 that runs Windows Server 2016. Server1 has an IP address of
192.168.1.78. Server1 has a container named Container1 that hosts a web application on port 84. Container1 has an IP
address of
172.16.5.6. Container1 has a port mapping from port 80 on Server1 to port 84 on Container1. You have a server named
Server2 that has an IP address of 192.168.1.79, You need to connect to the web application from Server2. To which IP
address and port should you connect?
A. 172.16.5.6:80
B. 192.168.1.78:80
C. 172.16.5.6:84
D. 192.168.1.78:84
Correct Answer: B
QUESTION 7
Note: This question is part of a series of questions that use the same or similar answer choices. An answer choice may
be correct for more than one question in the series. Each question is independent of the other questions in this series.
Information and details provided in a question apply only to that question.
Your network contains Windows and non-Windows devices.
You have a DHCP server named Server1 that has an IPv4 scope named Scope1.
You need to prevent a client computer that uses the same name as an existing registration from updating the
registration.
What should you do?
A. From the properties of Scope1, modify the Conflict detection attempts setting.
B. From the properties of Scope1, configure Name Protection.
C. From the properties of IPv4, configure the bindings.
D. From IPv4, create a new filter.
E. From the properties of Scope1, create an exclusion range.
F. From IPv4 run the DHCP Policy Configuration Wizard.
G. From Control Panel, modify the properties of Ethernet.
H. From Scope1, create a reservation.
Correct Answer: B
QUESTION 8
Your company has five departments, including a web research department.
You have a DHCP server named Server1 and two DNS servers named DNS1 and DNS2.
Server1 has an IPv4 scope named Scope1. All client computers are configured to use DNS1 for name resolution.
You need to ensure that users in the web research department use DNS2 for name resolution.
A. From the properties of Scope1, modify the Conflict detection attempts setting.
B. From the properties of Scope1, configure Name Protection.
C. From the properties of IPv4, configure the bindings.
D. From IPv4, create a new filter.
E. From the properties of Scope1, create an exclusion range.
F. From IPv4, run the DHCP Policy Configuration Wizard.
G. From Control Panel, modify the properties of Ethernet
H. From Scope1 create a reservation.
Correct Answer: A
References: https://technet.microsoft.com/en-us/library/ff606371.aspx
QUESTION 9
HOTSPOT
You have a network policy server (NPS) server named NPS1. One network policy is enabled on NPS1. The policy is
configured as shown in the following exhibit.
Use the drop-down menus to select the answer choice that completes each statement based on the information in the
graphic.
NOTE: Each correct selection is worth one point.
QUESTION 10
HOTSPOT
The domain has a Distributed File System (DFS) namespace named \\Adatum.com\Public. The DFS namespace
contains the folders shown in the following table.
The DFS folder targets are synchronized. All users have Read permissions to Folder1, Folder2, and Folder3. The
\\Adatum.com\Public DFS namespace has the following configurations.
For each of the following statements, select Yes if the statement is true. Otherwise, select No.
NOTE: Each correct selection is worth one point.
Hot Area:
Correct Answer:
References: https://docs.microsoft.com/en-us/windows-server/storage/dfs-namespaces/dfs-overview
QUESTION 11
HOTSPOT
Your network contains an Active Directory domain named contoso.com. The domain contains two servers named
Server1 and Server2 that run Windows Server 2016.
Server1 has IP Address Management (IPAM) installed. Server2 has the DHCP Server role installed. The IPAM server
retrieves data from Server2.
You create a domain user account named User1.
You need to ensure that User1 can use IPAM to manage DHCP.
Which command should you run on Server1? To answer, select the appropriate options in the answer area.
Hot Area:
Correct Answer:
QUESTION 12
You plan to deploy several Hyper-V hosts that run Windows Server 2016. The deployment will use Software defined
Networking (SDN) and VXLAN. Which server role should you install on the network to support the planned
deployment?
A. Network Controller
B. Network Policy and Access Services
C. Remote Access
D. Host Guardian Service
Correct Answer: A
QUESTION 13
Your company has a main office in London and a branch office in Seattle. The offices connect to each other by using a
WAN link.
In the London office, you have a Distributed File System (DFS) server named FS1 that contains a folder named
Folder1.
In the Seattle office, you have a DFS server named FS2.
All servers run Windows Server 2016.
You configure replication of Folder1 to FS2.
Users in both offices frequently add files in Folder1.
You monitor DFS Replication, and you discover excessive replication over the WAN link during business hours.
You need to reduce the amount of bandwidth used for replication during business hours. The solution must ensure that
the users can continue to save content to Folder1.
What should you do?
A. Modify the quota settings on Folder1 on FS2.
B. Modify the properties of the replication group.
C. Configure the copy of Folder1 on FS2 as read-only.
D. Modify the replicated folder properties of Folder1 on FS1.
Correct Answer: B
Microsoft 70-741 Pdf Dumps Updated June 20, 2020
[100% free] 70-741 Pdf Dumps From https://drive.google.com/file/d/1VKwVzIuukSnbCs8oieKqr8S2Rrb6Bbb2/view?usp=sharing
Pass the Microsoft 70-741 Exam in 3 Easy Steps
Learn How to Pass the Microsoft Certified Solutions Associate 70-741 Exam:
70-741 exam research
(You can start collecting resources (books, online guides, videos, practice questions/exercises, etc.). Once you have identified the resources that best suit your needs, you can develop a learning plan.)
- Implement Domain Name System (DNS) (15-20%)
- Implement DHCP and IPAM (25-30%)
- Implement Network Connectivity and Remote Access Solutions (20-25%)
- Implement Core and Distributed Network Solutions (15-20%)
- Implement an Advanced Network Infrastructure (15-20%)
https://docs.microsoft.com/en-us/learn/certifications/exams/70-741
70-741 exam studying
(The best way is to try to answer the questions in the exam. It doesn’t matter whether you make all the mistakes or not, at least you know where you stand.)
70-741 exam practice
Once you can answer/understand the 70-741 practice questions, you can start the actual exam.
Following the above strategy is the most effective way to approach the 70-741 exam.
Pass4itsure Discount Code 2020
The latest discount code “2020PASS” is provided below.
We are happy to provide Microsoft 70-741 free practice questions and exam dumps that you can use at any time. Microsoft 70-741 PDF problem. Learn more about Microsoft 70-741 questions https://www.pass4itsure.com/70-741.html Updated: Jul 28, 2020.
