Download 100% Pass Valid Oracle 1Z0-221 With New Added Questions

ATTENTION: Get your Oracle 1Z0-221 certification easily with ,Microsoft-technet latest Oracle 1Z0-221 exam dumps. All the up-to-date questions and answers were added to the new version. Go to the site Microsoft-technet.com to get more Oracle 1Z0-221 exam information.

QUESTION 1
ExamReal.com is a semiconductor discrete manufacturing organization. It has its own manufacturing and distribution centers located globally. It has these operating Units: US – USA operating unit CAN – Canadian operating unit UK – UK operating unit MX – Mexican operating unit IND – India operating unit SPA – Spain operating unit FRA – France operating unit NL – Netherlands operating Unit GER – Germany operating unit. These are the inventory organizations that exist in each operating unit: Inventory Org – Operating unit
CK (Master Org) – US US1 (Child Org) – US US2 (Child Org) – US CA1 (Child Org) – CAN MX1 (Child Org) – MX IN1 (Child Org) – IND SP1 (Child Org) – SPA FR1 (Child Org) – FRA NL1 (Child Org) – NL GE1 (Child Org) – GER Which three statements are true? (Choose three.)
A. Master organization CK cannot be shared across operating units.
B. All inventory organizations do not need to be in the same operating unit to assign items.
C. Items defined in CK organization can be assigned to US1,US2, NL1 and MX1 inventory organizations.
D. Organization items in the inventory responsibility assigned to FRA operating unit can be restricted, to not view the organization items assigned to US2 inventory organization.
E. You can define an item in IN1 inventory organization and assign it to GE1 inventory organization.
F. Items cannot be assigned to inventory organizations across operating units.

Correct Answer: BCD
QUESTION 2
You specified cycle count measurement error values when you defined your item at the master item or organization item level. You also specified a cycle count quantity variance approval tolerance at the cycle count item level. If the actual cycle count quantity for your item differs from the system on-hand quantity by less than the specified measurement error, Oracle Inventory _____.(Select one answer)
A. does not consider cycle count approval tolerance but makes a cycle count adjustment
B. applies the measurement error to the cycle count approval tolerance before the approval decision and makes a cycle count adjustment when approved
C. does not consider cycle count approval tolerance and does not make a cycle count adjustment
D. applies the measurement error to the cycle count approval tolerance before the approval decision and does not make a cycle count adjustment when approved

Correct Answer: B
QUESTION 3
Which three statements are true about defining an item using a template? (Assume that there are no Interdependent Attributes.) (Choose three.)
A. A template can be applied only at the master organization level.
B. A template applied to a master item, which has already been assigned to a child organization, can still update the organization-controlled item.
C. Modifying an item template will automatically update the items that were previously defined using that template.
D. A template can be applied at the master or child organization levels.
E. You can apply multiple templates to an item.
F. Template application is additive. If you apply a second template to an item, the item will retain the values of all the attributes that were not enabled by the second template.
G. Template application is exclusive. If you apply a second template to an item, the item will not retain any values of the prior template.

Correct Answer: DEF
QUESTION 4
You are setting up a requisition move order for which approval is required. At the organization level, you have defined the following:

However, the approval process is not being enabled for the organization item. What is a possible reason?
A. The subinventory source type has not been set to pull level.
B. The Move Order Timeout Action has been set to a value greater than zero.
C. A planner has not been assigned to the organization item.
D. The Move Order Timeout Period has been set to a value greater than zero.

Correct Answer: C QUESTION 5
From which Oracle applications can ‘in-transit’ receipts be received into an organization?
A. Purchasing and Work in Process
B. Purchasing and Order Management
C. Purchasing
D. Purchasing, Inventory, and Work in Process

Correct Answer: C QUESTION 6
A customer who distributes widgets has a warehouse with locations where material is stored. In the customer’s current system, users may receive material on a purchase order and indicate the location where it should go, but when the material is physically sent to the location, they may discover that the location is full. What is the best way to solve the problem ?
A. Set up the locations as locators, and use the capacity tab of the locator definition form to enter the maximum number of items that can be stored in the locator.
B. Set up each location as a subinventory and select the nettable flag.
C. Set up each location as a subinventory and select the Allow Reservation flag.
D. Set up each location as an organization and create locators in the organization.

Correct Answer: A QUESTION 7
You specified cycle count measurement error values when you defined your item at the master item or organization item level. You also specified a cycle count quantity variance approval tolerance at the cycle count item level. If the actual cycle count quantity for your item differs from the system on-hand quantity by less than the specified measurement error, Oracle Inventory _____.(Select one answer)
A. does not consider cycle count approval tolerance but makes a cycle count adjustment
B. applies the measurement error to the cycle count approval tolerance before the approval decision and makes a cycle count adjustment when approved
C. applies the measurement error to the cycle count approval tolerance before the approval decision and does not make a cycle count adjustment when approved
D. does not consider cycle count approval tolerance and does not make a cycle count adjustment

Correct Answer: B
QUESTION 8
Which three are Oracle Inventory replenishment methods? (Choose three.)
A. MRP (Materials Requirement Planning)
B. Replenishment Counting
C. Safety Stock
D. Kanban
E. Min-max Planning

Correct Answer: BDE
QUESTION 9
You are defining the staging subinventory for your sales order pick release rule. Which flag should be set on the subinventory setup for pick release to work?
A. The subinventory should have the Nettable flag selected.
B. The subinventory should have the Depreciable flag selected.
C. The subinventory should have the Reservable flag selected.
D. The subinventory should have the Pre-Processing Lead Time field populated.

Correct Answer: C
QUESTION 10
.com has portable bar code readers that are used to scan and read data about the amount of time charged on a resource that has been utilized on the manufacturing floor. This data about utilization is then processed in the Oracle Work in Process module by using a _____.
A. Material Transaction Manager
B. Cost Manager
C. Lot Move Transaction Manager
D. Concurrent Manager
E. Move Transaction Manager

Correct Answer: C
QUESTION 11
If an internal order is not required for the transfer between two organizations, then an interorganizational transfer of material (either direct or intransit type) between the inventory organizations applies to:

A. 2 only
B. 1 only
C. both 1 and 2

Correct Answer: C

QUESTION 12
Which four statements are true about generating a cycle count? (Choose four.)
A. The Cycle Count Enabled item attribute must be set to Yes for the items you want to include in your cycle count (assume autogenerated requests).
B. If an item is under serial control the cycle count will always create one count request for each serial number.
C. If you turn automatic scheduling on, you should specify the frequency of scheduling: daily, weekly, or by period.
D. You can schedule cycle counts either automatically or manually.
E. You can manually schedule count using the Manual Schedule Request window. You can request counts for specific subinventories, locators and items.

Correct Answer: ACDE
QUESTION 13
Which is the key setup required in order to restrict the access to an inventory organization by a user? (Choose one)
A. System administrator assigns the appropriate responsibility to a user.
B. System administrator sets up a restricted profile value for the user responsibility at the user level.
C. System administrator sets up an appropriate securing attribute value for the user application under the user definition.
D. A superuser sets up the organization access to the inventory organization for the user responsibility.

Correct Answer: D
QUESTION 14
Which four statements are true regarding interorganization transfer? (Choose four.)
A. The validity of a transfer transaction is governed by the controls you have defined in the shipping organization for the items you want to transfer; these controls are then transferred to the destination organization.
B. You can transfer one or more items in a single transaction and transfer partial quantities of the same item to different subinventories and locators in a single transaction.
C. The validity of a transfer transaction depends on the controls you have defined in both the shipping and destination organizations for the items you want to transfer.
D. You can define multiple inventories, warehouses, and manufacturing facilities as distinct organizations.
E. You can transfer expense and asset items from one organization to another using intransit inventory.
F. You cannot transfer partial quantities of the same item to different subinventories and locators in a single transaction.
G. The items you transfer must not exist in both organizations.
H. You cannot set multiple intransit times for a single shipping method.

Correct Answer: BCDE
QUESTION 15
View the Exhibit.
You are setting up Oracle Inventory for a new client. The organizational structure consists of one set of
books, two legal entities, and three operating units.
The three operating units have three, one and two inventory organizations respectively. What is the total
number of Oracle Inventory instances required to model this structure? Exhibit:
A. 2
B. 3
C. 1
D. 6

Correct Answer: C
QUESTION 16
There are three possible methods to define an “Inventory item”. Each method requires some minimum information about the item. Which three options correspond to the three methods, and list the minimum information required to define an “Inventory item” for an average costing inventory organization? (Choose three.)
A. Item, Item Description, Item template, Item Category, Long Description, Item DFF (descriptive flexfield)
B. Item, Item Description and Functional usage of the item for setting the attribute control
C. Item, Item Description, Seeded “Finished Goods” Item template
D. Item, Item Description, Copy existing Inventory item
E. Item, Item Description, Item template, Item Cost
F. Item, Item Description

Correct Answer: BCD
QUESTION 17
You are doing a cycle count approval transaction. You want the transaction to be processed while you wait. The control needs to be returned to you after the transaction processing is complete. To achieve this, you would set the profile option Cycle Count Approval Form to _____.
A. Background Processing
B. Concurrent Processing
C. Online Processing
Correct Answer: C QUESTION 18
Oracle Inventory interacts with other Oracle applications by sharing information. Choose two pieces of information that Oracle Payables, Receivables and Assets applications receive from the Inventory module. (Choose two.)
A. item information
B. on-hand information
C. UOM information
D. transaction accounting detail information
E. ATP supply information

Correct Answer: AC
QUESTION 19
Which two statements are true about the item master? (Choose two.)
A. There is no functional or technical difference between the Item Master organization and other organizations.
B. It is possible to associate items in one item master organization with another item master organization.
C. It is possible to copy items across item master organizations.
D. When an attribute control is set at the item master level, updates can still be made at the item/ organization level but these updates will not propagate back up to the item master level.
E. When an attribute control is set at the item master level, updates are not allowed at the item/ organization level.

Correct Answer: AE
QUESTION 20
View the Exhibit.
You are setting up Oracle Inventory for a new client. The organizational structure consists of one set of
books, two legal entities, and three operating units.
The three operating units have three, one and two inventory organizations respectively. All the operating
units will use the same item numbers. You should set up all costing attributes at the _____ level.
Exhibit:
A. legal entity
B. inventory organization
C. subinventory organization
D. operating unit
E. set of books (business group)

Correct Answer: B
QUESTION 21
Which four attributes are item-defining attributes? (Listed first is the functional area, followed by the item defining attribute.) (Choose four.)
A. MPS/MRP Planning/ Planning Method
B. Advanced Pricing / Invoice Enabled
C. Purchasing / Purchased
D. Inventory / Inventory Item
E. Costing/ Costing Enabled
F. Order Management / Customer Orderable

Correct Answer: CDEF
QUESTION 22
You have specified cycle count variance approval tolerances for your cycle count. You have also set the Approval Required option in your cycle count to “If out of tolerance”. If the cycle count quantity entered for your item exceeds the approval tolerance specified, Oracle Inventory _____. (Select one answer)
A. holds the cycle count adjustment for approval and posts it after approval
B. holds the cycle count adjustment for approval and does not post the adjustment after approval
C. holds the cycle count adjustment for a recount and does not post the adjustment
D. automatically approves and posts the cycle count adjustment

Correct Answer: A
QUESTION 23
Which two statements about the Stock Locator flexfield are true? (Choose two.)
A. You have to use the same value set for all the segments of the Stock Locator flexfield.
B. Stock Locator is set up as a descriptive flexfield.
C. You cannot have a . character in your locator name.
D. You have the flexibility to set up segments of the stock locator as mandatory or not mandatory.
E. Stock Locator is set up as a key flexfield.

Correct Answer: DE
QUESTION 24
Which three statements are true regarding Inventory replenishment methods? (Choose three.)
A. Min-max planning considers carrying cost.
B. When you define an item, you can specify both reorder point planning and min-max planning to place limits on the calculated reorder point.
C. Min-max planning can be performed at the subinventory level.
D. Reorder point planning considers order cost.
E. Reorder point planning considers replenishment lead time.

Correct Answer: CDE
QUESTION 25
.com is a vending machine manufacturer. .com wants to track its finished goods by both lot and serial control. They decide to assign serial numbers during shipment to the customer, and lot numbers at the time of receiving the machine into stock. Which setup option needs to be selected?
A. serial number generation at sales order issue
B. full lot control
C. no lot control, and serial number generation predefined
D. full lot control, and serial number generation at sales order issue
E. serial number generation at receipt
F. full lot control and serial number generation at receipt
G. full lot control and no serial number control
Correct Answer: D

Ensure that you are provided with only the best and most updated Oracle 1Z0-221 Certification training materials, we also want you to be able to access Oracle 1Z0-221 easily, whenever you want.We provide all our Oracle 1Z0-221 Certification exam training material in PDF format, which is a very common format found in all computers and gadgets. Now we add the latest Oracle 1Z0-221 content and to print and share content.