Cisco 642-587 Exams, High Pass Rate Cisco 642-587 Preparation Materials Online Store

Do not you know how to choose the Cisco 642-587 exam dumps? Being worried about the changed questions? Just try Flydumps new version Cisco 642-587 exam dumps. All the new questions and answers were added to the new dumps,visit Flydumps.com to free download Cisco 642-587!

QUESTION 76
Cisco WCS version 4.0 is supported on which operating system?
A. Solaris 10
B. Vista
C. Windows XP Pro
D. Windows 2000 SP4
E. Windows Server 2003

Correct Answer: E Section: (none) Explanation
Explanation/Reference: QUESTION 77
A mobility group is created by a Cisco WLCM and 4402 Series Wireless LAN Controller. A client that is anchored on the Cisco WLCM roams to an access point on the 4402 controller. You then run a debug command on the 4402 controller. Which message would best describe the establishment of the tunnel from the foreign controller’s perspective?
A. Transmit Mobile Anchor Export message
B. Receive Mobile Anchor Export message
C. Transmit Plumbing duplex mobility tunnel message
D. Receive Plumbing duplex mobility tunnel message

Correct Answer: A Section: (none) Explanation
Explanation/Reference:
QUESTION 78
You are configuring an RF group of controllers that coordinate Radio Resource Management calculations. What is the maximum number of WLAN controllers that you can add?
A. 12
B. 17
C. 20
D. 24

Correct Answer: C Section: (none) Explanation
Explanation/Reference:
QUESTION 79
Which Cisco Aironet Series devices can be powered using 802.3af inline power?
A. Cisco Aironet 1100 Series
B. Cisco Aironet 1300 Series
C. Cisco Aironet 1400 Series
D. Cisco Aironet 1240AG Series

Correct Answer: D Section: (none) Explanation
Explanation/Reference:
QUESTION 80
You are installing a Cisco Aironet 1000 Series controller-based access point. When you boot it, all the LEDs on the access point blink together. What does this indicate about the access point?
A. normal operation
B. duplicate IP address
C. code upgrade in progress
D. searching for primary controller
Correct Answer: C Section: (none) Explanation

Explanation/Reference:
QUESTION 81
You have a very few Cisco 7920 wireless IP phones on your network, but lots of wireless laptops. You want to increase the bandwidth available for the laptops by decreasing the bandwidth reserved for the Cisco 7920 phones. What is the lowest percentage of voice-allocated bandwidth you can select on the WLAN controller?
A. 25 percent
B. 40 percent
C. 55 percent
D. 75 percent

Correct Answer: B Section: (none) Explanation
Explanation/Reference:
QUESTION 82
Which of the following statements explains why it is normally best to have more than one controller-based access point participate in the containment of one rogue access point?
A. Multiple controller-based access points will load-balance the containment task using fewer resources than a single access point.
B. Clients connected to the rogue access point may be out of the range of the controller-based access point providing containment.
C. Each controller-based access point can handle only a limited amount of clients connected to the rogue access point.
D. Clients connected to the rogue access point must be able to connect to the containment controller-based access point.

Correct Answer: B Section: (none) Explanation
Explanation/Reference:
QUESTION 83
Which authentication types are allowed with the Cisco ADU when selecting WPA/WPA2/CCKM under the security options?
A. Cisco-LEAP, EAP-FAST, EAP-PEAP (GTC), EAP-TLS
B. Cisco -LEAP, EAP-MD5, EAP-PEAP (GTC), EAP-TTLS
C. Cisco-LEAP, EAP-PSK, EAP-PEAP (MS-CHAP v2), EAP-TLS
D. Cisco-LEAP, EAP-FAST, EAP-PEAP (MS-CHAP v2), EAP-TTLS

Correct Answer: A Section: (none) Explanation
Explanation/Reference: QUESTION 84
On a Cisco Aironet 802.11 a/b/g wireless LAN client adapter, the status LED and activity LED are alternating on and off. What does this indicate?
A. The client card has failed.
B. The client card is not associated to the network.
C. The driver has been installed incorrectly.
D. The client card has awakened from power-save mode.

Correct Answer: B Section: (none) Explanation
Explanation/Reference:
QUESTION 85
You have just finished aligning a Cisco Aironet 1400 Series Wireless Bridge link using installation mode. When you set the link back to operational mode you loose association to the root bridge. Which action will correct the problem?
A. Configure the proper channel.
B. Enable passwords on both bridges.
C. Configure the distance parameter value.
D. Configure the bridge to force infrastructure devices to associate only to the SSID parameter.

Correct Answer: C Section: (none) Explanation
Explanation/Reference:
QUESTION 86
Which of the following settings will reduce packet overhead and overall latency in a standalone point-to-point bridge deployment?
A. enable concatenation on the root bridge only
B. enable concatenation on the non-root bridge only
C. enable concatenation on both the root bridge and non-root bridge
D. enable concatenation on the root bridge and set it as desirable on the non-root bridge
E. set concatenation as desirable on the root bridge and enable it on the non-root bridge

Correct Answer: C Section: (none) Explanation
Explanation/Reference:
QUESTION 87
By default, on the WLAN controller for a voice application using Cisco 7921 wireless IP phones, what is the percentage of RF bandwidth that can be dedicated to the phones?
A. 55 percent
B. 56 percent
C. 75 percent
D. 85 percent

Correct Answer: C Section: (none) Explanation
Explanation/Reference:
QUESTION 88
When configuring Cisco Secure ACS to support wireless EAP authentication, which device must be configured as a AAA client?
A. Wireless Control System
B. Wireless clients
C. Wireless controllers
D. Control-based access points
E. Location Appliance

Correct Answer: C Section: (none) Explanation
Explanation/Reference:
QUESTION 89
What is the maximum number of wireless controllers that the highest-end Cisco WCS server can manage?
A. 35
B. 50
C. 100
D. 250

Correct Answer: D Section: (none) Explanation
Explanation/Reference:
QUESTION 90
On a WLAN controller, what is the default roaming bandwidth percentage reserved for voice clients?
A. 6 percent
B. 12 percent
C. 18 percent
D. 24 percent

Correct Answer: A Section: (none) Explanation
Explanation/Reference:
QUESTION 91
You are trying to change the polling parameters used by the location manager via the Cisco WCS, and your request is being denied. What is wrong?
A. Your login does not have the correct permissions.
B. You must wait for the location server to become available.
C. Polling values can be changed only on the location server.
D. Polling values can be changed only in the maintenance window.

Correct Answer: A Section: (none) Explanation
Explanation/Reference:
QUESTION 92
If all client exclusion policies are enabled, on which number of tries will 802.1X authentications be excluded using controller-based access points?
A. three
B. four
C. five
D. six

Correct Answer: B Section: (none) Explanation
Explanation/Reference:
QUESTION 93
On a Cisco Aironet 1240AG Series standalone access point, the radio LED is dark blue and blinking, but the status LED and Ethernet LED are both off. What does this indicate?
A. A firmware upgrade is in progress.
B. An access point buffer overflow is occurring.
C. The internal radio has failed.
D. The access point is booting.

Correct Answer: D Section: (none) Explanation
Explanation/Reference:
QUESTION 94
How many RADIUS servers can be added to a controller and thereafter assigned to the authentication or accounting of individual WLAN IDs?
A. 14
B. 15
C. 16
D. 17

Correct Answer: D Section: (none) Explanation
Explanation/Reference: QUESTION 95
You are troubleshooting a one-way call problem with a Cisco 7920 wireless IP phone on a standalone WLAN. What may cause this problem?
A. The minimum data rate is not set to 11 Mbps.
B. An address resolution protocol has been disabled
C. Publicly Secure Packet forwarding is enabled
D. The access point is set to the least congested channel.

Correct Answer: B Section: (none) Explanation
Explanation/Reference:
QUESTION 96
Which command will enable DHCP debugging on a WLAN controller?
A. debug dhcp enable
B. debug dhcp status enable
C. debug dhcp packet enable
D. enable debug dhcp packet

Correct Answer: C Section: (none) Explanation
Explanation/Reference:
QUESTION 97
Clients using Cisco-LEAP and EAP-FAST authentication are having no problems logging on to the wireless network, but clients using PEAP are failing to log on. Which situation would result in this type of problem?
A. The AAA server is set to accept both MS-CHAP v2 and GTC for PEAP authentication.
B. Clients have been set to validate the server identity.
C. Posture validation has not been enabled.
D. Clients and server are not using certificates.

Correct Answer: D Section: (none) Explanation
Explanation/Reference:
QUESTION 98
A Cisco WCS version 4.0 has been installed on a server with a dual Pentium 3.0 GHz processor, 4GB RAM, and an 80 GB hard drive. A location appliance has been incorporated into the network and is being monitored by the Cisco WCS. There are 3000 devices to be tracked but not all of them are being tracked on the Cisco WCS. What can be done to correct the problem?
A. Add 4GB RAM to the Cisco WCS.
B. Add a 120 GB hard drive to the Cisco WCS.
C. Add a new location appliance.
D. Add a new Cisco WCS server dedicated to the location appliance.
Correct Answer: C Section: (none) Explanation

Explanation/Reference:
QUESTION 99
When optimizing a standalone point-to-multipoint bridge installation with eight non-root bridges, which of the following RTS threshold and CWmin settings would be correct for the non-root bridges?
A. RTS threshold=4000, CWmin=3
B. RTS threshold=1, CWmin=4
C. RTS threshold=4000, CWmin=5
D. RTS threshold=1, CWmin=5

Correct Answer: D Section: (none) Explanation
Explanation/Reference:
QUESTION 100
What is the correct order of steps for upgrading a Cisco WCS
A. back up the database, stop the WCS, upgrade the WCS, restore the database, start the WCS
B. stop the WCS, back up the database, upgrade the WCS, restore the database, start the WCS
C. back up the database, stop the WCS, upgrade the WCS, start the WCS, restore the database
D. stop the WCS, back up the database, upgrade the WCS, start the WCS, restore the database

Correct Answer: B Section: (none) Explanation
Explanation/Reference:

Flydumps.com provides you with the most reliable practice exams to master Cisco 642-587 Certification. Our Microsoft questions and answers are certified by the senior lecturer and experienced technical experts in the Cisco field. These test questions provide you with the experience of taking the actual test.