Cisco 642-062 Dump Test, 100% Success Rate Cisco 642-062 Exam Materials With Accurate Answers

Fully Updated Do not hesitate to choose Flydumps Cisco 642-062 VCE Exam Dumps, all are updated timely by SAP expert professionals.Visit the site Flydumps.com to get the free Cisco 642-062 pdf dumps and free vce player.

QUESTION 35
Your customer is a major international airport. The airport requires keeping connectivity options flexible for wireless and wired clients, video surveillance, and baggage distribution. At the same time, it requires isolating specific closed user groups such as air traffic control communication. Which design best suits the needs of your customer? Select the best response.
A. A full-mesh design with no dedicated core.
B. A two-layered design with a Cisco Catalyst 4500 Series Switch at the core layer.
C. A three-layered design with a Cisco Catalyst 3750 Series Switch at the core layer.
D. A three-layered design with a Cisco Catalyst 6500 Series Switch at the core layer.

Correct Answer: D Section: (none) Explanation
Explanation/Reference:
QUESTION 36
Your customer needs to send encrypted data among three branch offices. You want to ensure that all
devices in a group can successfully exchange encrypted packets. Which transport network augmentation
will provide any-to-any IPsec connectivity to ensure that successful packet exchange occurs?
Select the best response.

A. DMVPN
B. GET VPN
C. GRE over IPsec
D. VTIs

Correct Answer: B Section: (none) Explanation
Explanation/Reference:
PassGuide.com – Make You Succeed To Pass IT Exams PassGuide 642-062
QUESTION 37
You are designing a campus network for your customer. You need to provide the customer with uplink connectivity because a single access switch is used to provide connectivity to more than one user group. Which access layer component should you deploy? Select the best response.
A. IEEE 802.1Q trunks
B. integrated security features
C. IP telephony design
D. spanning-tree mechanisms

Correct Answer: A Section: (none) Explanation
Explanation/Reference:
QUESTION 38
Which Cisco PIN architecture uses Cisco Integrated Services Routers to support existing and emerging IP technologies, including IP telephony and video, point-of-sale terminals, kiosks, and RFID devices? Select the best response.
A. Data Center
B. Teleworker
C. Campus
D. Branch

Correct Answer: D Section: (none) Explanation
Explanation/Reference:
QUESTION 39
Which Cisco advanced technology provides interconnected storage area networks so that you can reduce
costs and improve reliability?
Select the best response.

A. Cisco Unified Communications
B. Data Center
C. Mobility
D. Network Management
E. Security

Correct Answer: B Section: (none) Explanation
Explanation/Reference:
QUESTION 40
During the baselining process, what should you do immediately after you compile an inventory? Select the best response.
A. verify that the SNMP MIB is supported in the relevant core device
B. poll and record specific SNMP MID objects from the device
C. fix identified, immediate problems
D. implement monitoring using SNMP or RMON

Correct Answer: A Section: (none) Explanation
Explanation/Reference:
PassGuide.com – Make You Succeed To Pass IT Exams PassGuide 642-062
QUESTION 41
Which two technologies are associated with the Campus PIN architecture? (Choose two.) Select 2 response(s).
A. DMVPN
B. GET VPN
C. IPv4 to IPv6
D. Layer 2 to Layer 3
E. MPLS VPN

Correct Answer: CD Section: (none) Explanation
Explanation/Reference: QUESTION 42
Refer to the exhibit. Which PIN architecture is represented?

Select the best response.
A. Branch
B. Campus
C. Data Center
D. Teleworker

Correct Answer: A Section: (none) Explanation
Explanation/Reference:
QUESTION 43
What are three important characteristics of the Cisco Catalyst 2960G-24TC switch? (Choose three.) Select 3 response(s).
A. each Ethernet 10/100/1000 port supports up to six priority queues each with two drop thresholds PassGuide.com – Make You Succeed To Pass IT Exams PassGuide 642-062
B. does not support 802.3af PoE
C. uses the GBIC/SFP form factor for dual-purpose ports
D. provides a maximum forwarding bandwidth of 32 Gbps E. contains 24 Ethernet 10/100/1000 ports and 2 dual-purpose slots

Correct Answer: BCD Section: (none) Explanation
Explanation/Reference:
QUESTION 44
Which service component would you typically perform prior to the handover to the customer’s operations organization and involves running system operations to ensure that the solution is ready for production? Select the best response.
A. Systems Integration
B. Acceptance Testing
C. Skill Assessment
D. Project Close Out
E. Security Check

Correct Answer: B Section: (none) Explanation
Explanation/Reference:
QUESTION 45
What is a primary objective of the security architecture assessment? Select the best response.
A. document power and UPS availability
B. to integrate routing and switching components
C. create a design specification document
D. document the customer’s current and future technology projects

Correct Answer: B Section: (none) Explanation
Explanation/Reference:
QUESTION 46
Refer to the exhibit. What are three key benefits of implementing this branch solution using the components listed? (Choose three.)

Select 3 response(s).
A. supports standard 802.3af PoE
B. provides feature parity with the Cisco Catalyst 3750 Series of switches
C. provides integrated configuration of both routing and switching functions under a single Cisco IOS instance. PassGuide.com – Make You Succeed To Pass IT Exams PassGuide 642-062
D. switch ports can be stacked with external Catalyst Series switches using Cisco StackWise technology
E. maximizes concurrent routing and switching performance by using local processors and switching engines

Correct Answer: ABE Section: (none) Explanation
Explanation/Reference:
QUESTION 47
When issuing the Cisco IOS command show power in the Cisco Catalyst 6509 Switch, which four types of information can be gathered? (Choose four.) Select 4 response(s).
A. IOS revision level
B. operational state
C. line card revision
D. power supply fan status
E. line card administrative state and slot location
F. power capacity in watts and amperage by chassis and line card

Correct Answer: BDEF Section: (none) Explanation
Explanation/Reference:
QUESTION 48
In the Cisco Catalyst 6500-E Series chassis, what are three key chassis specifications? (Choose three.) Select 3 response(s).
A. requires Cisco IOS 12.2(1)SXD and beyond
B. three-slot chassis supports CEF720 line cards
C. is backward-compatible with all existing software versions
D. six- and nine-slot chassis support only 6000-W power supplies
E. supports all existing supervisors, line cards, switch fabrics, and software releases

Correct Answer: BCE Section: (none) Explanation
Explanation/Reference:
QUESTION 49
Given a Cisco Catalyst 4500 Series Switch with redundant supervisors, what feature allows phone calls to remain up in the event of a supervisor failure? Select the best response.
A. HSRP
B. SSO
C. CEF
D. NSF
E. NetFlow

Correct Answer: B Section: (none) Explanation
Explanation/Reference:
QUESTION 50
Which three of these are features of the Cisco Catalyst 4900 Series Switches? (Choose three.) Select 3 response(s).
A. one RU PassGuide.com – Make You Succeed To Pass IT Exams PassGuide 642-062
B. stackable
C. fixed configuration
D. Power over Ethernet
E. redundant power supplies
F. Layer 2 through Layer 7 switching capabilities

Correct Answer: ACE Section: (none) Explanation
Explanation/Reference:
QUESTION 51
Refer to the exhibit. Which network is characterized by the output from the show cdp neighbors command? Select the best response.

A. Network 1
B. Network 2
C. Network 3
D. Network 4

Correct Answer: A Section: (none) Explanation
Explanation/Reference:
QUESTION 52
Which is a reliable network auditing methodology for discovering applications on the network and their
usage characteristics?
Select the best response.

A. Interview system administrators regarding the networked applications.
B. Conduct a network usage study over a given period of time.
C. Place a sniffer device on the network to grasp a snapshot of traffic on the network.
D. Conduct a network inventory of servers and applications installed on them.

Correct Answer: B Section: (none) Explanation
Explanation/Reference:
PassGuide.com – Make You Succeed To Pass IT Exams PassGuide 642-062
QUESTION 53
Refer to the exhibit. Given that the network is running OSPF routing protocol over the WAN, which type of OSPF routing is being used on the router labeled “Mollie”? Select the best response.

A. point to point
B. virtual link
C. point to multipoint
D. route redistribution

Correct Answer: C Section: (none) Explanation
Explanation/Reference:
QUESTION 54
Refer to the exhibit. The network is running the EIGRP routing protocol. Distribution router 1 loses the link to the corporate network. How should the remote spoke router be configured to prevent it from being the next-lowest-cost path to network 10.3.1.0? Select the best response.

A. Disable split horizon.
B. Configure it as an EIGRP stub router.
C. Enable route filtering. PassGuide.com – Make You Succeed To Pass IT Exams PassGuide 642-062
D. Configure a floating static route to network 10.3.1.0.

Correct Answer: B Section: (none) Explanation
Explanation/Reference:
QUESTION 55
Refer to the exhibit. Which would be a benefit of designing the OSPF network as shown? Select the best response.

A. Routes can be redistributed within the individual areas.
B. The backbone area does not need any internal routers.
C. Route summarization is enabled by default in this type of configuration.
D. Route summarization configuration at the ABRs is greatly simplified.

Correct Answer: D Section: (none) Explanation
Explanation/Reference: QUESTION 56
You have a client that currently has a single connection to an ISP. Your client is growing rapidly and would like to provide more capacity to the Internet without losing the ability to support high availability. Which methodology will support dual-homed connections to the same ISP and also support high availability? Select the best response.
A. VRRP
B. HSRP
C. RPR+
D. GLBP

Correct Answer: D Section: (none) Explanation
Explanation/Reference:
PassGuide.com – Make You Succeed To Pass IT Exams PassGuide 642-062
QUESTION 57
Your client is adding a new R&D facility to its existing, three-building corporate campus. The new building will be four stories high and house from 150 to 400 employees. The client would like to deploy IP communications to this building and connect it to the existing campus TDM phone system. The new building will use collaborative workspaces for each team, and it will require that each team member have the flexibility to move among work areas yet remain connected to the network and receive phone calls. Which four technologies will be applicable here? (Choose four.) Select 4 response(s).
A. wireless
B. switching
C. security
D. storage
E. PoE
F. AONS

Correct Answer: ABCE Section: (none) Explanation
Explanation/Reference:
QUESTION 58
A client organization is investigating deploying IP communications. It has a traditional hub- and-spoke Frame Relay WAN. It has five remote sites, and the WAN link speed for each location is 512 kbps. The WAN supports typical IP-based applications, but the client will also be rolling out a new ERP application that will be considered mission critical. Which three QoS mechanisms will be useful in redesigning the WAN to support the mission-critical application and IP communications? (Choose three.) Select 3 response(s).
A. LFI
B. CBWFQ
C. 5 to 11 class model
D. LLQ
E. cRTP
F. WFQ

Correct Answer: ADE Section: (none) Explanation Explanation/Reference:
QUESTION 59
You have received an RFP from a potential client to design a network for a new corporate campus. This campus will encompass administration, sales, and R&D, and it will pull all the distributed IT functions into a new data center. The campus will consist of five buildings, each with four floors. The buildings will be linked via high-strand-count, single-mode fiber-optic cable to the new data center in building 3. Each building will have an MDF with at least one telco closet per floor and at least two runs of Category 5 UTP cable will go to each work location. Multistrand multimode will connect each telco closet to the MDF. Each MDF will have dedicated power circuits and be backed up by batteries in the basement of each building and a generator. The corporation will require 3500 TDM telephones and approximately 100 of these will be in a call center in building 2. The corporation needs to increase collaboration in the workforce.
PassGuide.com – Make You Succeed To Pass IT Exams PassGuide 642-062
Employees need the flexibility to be able to move from one floor to another or from one building to another to accomplish their jobs. Managers also need this flexibility without losing connectivity to the corporate network or their phones. Building 4 will house R&D. This portion of the network requires connectivity to the Internet, but it also must restrict which employees have access to certain parts of the R&D network. The data center will house all connections to the Internet and to the PSTN. The corporation also provides access to customers for customized applications support. A network operations center will monitor and maintain the network on a 365/24/7 basis. Which advanced technologies will be applicable to answering this RFP? (Choose three.) Select 3 response(s).
A. security
B. IP communications
C. storage
D. data center
E. routing and switching

Correct Answer: ACD Section: (none) Explanation
Explanation/Reference:
PassGuide.com – Make You Succeed To Pass IT Exams

Cisco 642-062 tests containing questions that cover all sides of tested subjects that help our members to be prepared and keep high level of professionalism.The main purpose of Cisco 642-062 exam is to provide high quality test that can secure and verify knowledge,give overview of question types and complexity that can be represented on real exam certification