Cisco 642-061 Exam Sample, 100% Pass Rate Cisco 642-061 Self Study Covers All Key Points

You can prepare for Cisco 642-061 with little effort because Flydumps is now at your service to act as a guide in Flydumps you pass Cisco 642-061 exam.Now get that necessary competitive edge that comes with preparing with the help of Flydumps.

QUESTION 133
Exhibit: *** MISSING ***
You work as a network administrator at Certkiller .com. You study the exhibit carefully. Certkiller .com has
merged with another company and has decided to deploy an MPLS VPN to connect that company with its
network. Which situation will be the result of implementing an MPLS VPN network?

A. The PE routers will install the routes learned from the P routers in the appropriate VRF.
B. The P and PE routers will share a common IGP.
C. The PE routers will have been configured to run MPLS with the CE routers.
D. The PE routers will not install the backbone IGP routes in the global routing table, but rather in the MPLS backbone VRF.
E. The MPLS backbone, the P routers, will require BGP to be implemented to be able to label-switch packets from PE1 to PE2.

Correct Answer: B
QUESTION 134
What is the difference between the two redundant states that a Cisco Catalyst 6500 Series power supply can operate in?
A. In redundant mode, one power supply works until it reaches 50 percent power consumption, then the load is shared equally across the power supplies.
B. In redundant mode, both power supplies work at 50 percent of capacity, and in a nonredundant mode, the power available to the system is the combined power capability of both power supplies.
C. In redundant mode, one power supply works at 100 percent of capacity while the other provides instantaneous backup, and in combined mode the output of each power supply is configured by the user.
D. In redundant mode, both power supplies work at 50 percent of capacity, and in nonredundant mode the output of each power supply is configured by the user.

Correct Answer: B
QUESTION 135
To improve performance on the ISR platforms when supporting concurrent integrated services, the network modules, HWICs, AIMs, and DSPs connect directly into which hardware component?
A. PCI bus
B. crossbar bus
C. custom ASIC
D. SCSI bus
E. CPU

Correct Answer: C
QUESTION 136
Which option makes the Cisco 3200 Series Mobile Access Router a compelling platform for public safety applications?
A. support for 4.9-GHz WMIC
B. support for up to 512 stations with TKIP and AES-CCM encryption
C. integrated support for 802.11a/b/g”
D. ability for 2.4-GHz WMIC to act as a WDS server at a hotspot

Correct Answer: A
QUESTION 137
Exhibit: *** MISSING ***
You work as a network administrator at Certkiller .com. You study the exhibit carefully. What are three key
benefits of implementing this branch solution using the components listed? (Choose three.)

A. maximizes concurrent routing and switching performance by using local processors and switching engines
B. supports standard 802.3af PoE
C. provides feature parity with the Cisco Catalyst 3750 Series of switches
D. provides integrated configuration of both routing and switching functions under a single Cisco IOS instance.
E. switch ports can be stacked with external Catalyst Series switches using Cisco StackWise technology

Correct Answer: ABC
QUESTION 138
Exhibit:

You work as a network administrator at Certkiller .com. You study the exhibit carefully. Based on this network diagram and output from a show cdp neighbors Cisco IOS command, on which network device is the command being executed?
A. Certkiller 2
B. Certkiller 4
C. Certkiller 3
D. Certkiller 1

Correct Answer: A QUESTION 139
Which three features are supported by the Cisco 7600 Series router? (Choose three.)
A. high performance, with a 720-Gbps capacity per slot
B. 3-, 6-, 9-, 13-slot chassis
C. IP/MPLS provider edge router
D. all models are NEBS compliant
E. Metro Ethernet connectivity

Correct Answer: BCE
QUESTION 140
An administrator wishes to connect two Cisco Catalyst 3750 Series Switches in a back-to-back configuration. A straight-through Category 5e cable is used. What is the result of making this connection?
A. The connection will fail because the connection requires a Category 6 or higher cable.
B. The connection will succeed as the switches will automatically adjust to the cable type.
C. The connection will succeed after manually configuring one of the interfaces as a crossover port.
D. The connection will fail as the TX and RX pins are not properly aligned.
E. The connection will fail; a back-to-back connection requires a crossover cable.

Correct Answer: B
QUESTION 141
Exhibit: *** MISSING ***
You work as a network administrator at Certkiller .com. You study the exhibit carefully. Which would be a
benefit of designing the OSPF network as shown?

A. Routes can be redistributed within the individual areas.
B. The backbone area does not need any internal routers.
C. Route summarization is enabled by default in this type of configuration.
D. Route summarization configuration at the ABRs is greatly simplified.

Correct Answer: D
QUESTION 142
You are required to upgrade the network of a multistory branch office building to support Cisco 7970 IP Phones throughout. Given that each phone uses 15.4 W, how many phones can a Cisco Catalyst 3750 support using Cisco Intelligent Power Management in a 48-port PoE configuration?
A. 32
B. 8
C. 48
D. 24
E. 16

Correct Answer: D
QUESTION 143
Which type of network traffic is characterized as smooth, benign, drop-sensitive, and delay-sensitive and is typically UDP based?
A. voice to voice
B. data to data
C. voice to video
D. video to data
Correct Answer: A QUESTION 144
In the Cisco Catalyst 6513 Switch, which slots support the Supervisor Engine 720 and Supervisor Engine 32?
A. slots 7 and 8
B. any slot
C. slots 1 and 2
D. slots 5 and 6
E. slots 12 and 13

Correct Answer: A
QUESTION 145
You are working with a client that has deployed CiscoWorks LMS in conjunction with an IP communications solution. The client has a current requirement to track IP communications end stations. Which CiscoWorks LMS component would the client need to use?
A. CiscoWorks Resource Manager Essentials
B. CiscoWorks CiscoView
C. CiscoWorks Device Fault Manager
D. CiscoWorks Internetwork Performance Monitor
E. CiscoWorks Campus Manager
Correct Answer: E
QUESTION 146
In a Cisco Catalyst 6509 Switch, in which slots can the Sup2 card be installed?
A. slots 1 and 2
B. any slot
C. slots 1 through 9
D. slots 3 and 4
E. slots 5 and 6
Correct Answer: E

Try Cisco 642-061 exam free demo before you decide to buy it in Flydumps.After you buy Flydumps Cisco 642-061 exam dumps, you will get free update for ONE YEAR!

You may also like...