Cisco 640-911 Demo Free Download, Download Cisco 640-911 Certification Exam Online Sale

Flydumps Cisco 640-911 exam questions which contain almost 100% correct answers are tested and approved by senior Microsoft lecturers and experts.They have been devoting themselves to providing candidates with the best study materials to make sure what they get are valuable.Get a complete hold on Cisco 640-911 dumps on Flydumps,you will pass the exam absolutely.

QUESTION 46
What are three modular Layer 3 processes in Cisco Nexus Operating System? (Choose three.)
A. UDLD
B. PIM
C. HSRP
D. STP
E. OSPF
F. Cisco Discovery Protocol
Correct Answer: BCE
QUESTION 47
What are two default user roles in Cisco Nexus Operating System? (Choose two.)
A. Admin
B. Network Operator
C. Operator
D. Storage Operator
E. Root
F. System Manager

Correct Answer: AB
QUESTION 48
On most keyboards, the Up arrow and Down arrow keys move through the command history. Which two key sequences can be used as alternatives? (Choose two.)
A. Alt-A
B. Alt-F
C. Alt-N
D. Alt-E
E. Alt-P
Correct Answer: CE
QUESTION 49
What is the function of the Tab key on the Cisco Nexus Operating System command-line interface?
A. redisplays the current command line
B. deletes all characters from the cursor to the end of the command line
C. clears the terminal screen
D. completes a partially entered command if enough characters are present
E. moves the cursor one word to the right

Correct Answer: D
QUESTION 50
Where does Cisco Nexus Operating System store the running configuration file?
A. RAM
B. flash
C. bootflash
D. volatile

E. NVRAM
Correct Answer: A
QUESTION 51
Where does Cisco Nexus Operating System store the startup configuration file?
A. RAM
B. flash
C. bootflash
D. volatile

E. NVRAM
Correct Answer: E
QUESTION 52
Which two commands would you use to erase the Cisco Nexus Operation System configuration and return the switch to factory defaults? (Choose two.)
A. nexus# write erase boot
B. nexus# erase configuration
C. nexus# erase running-configuration
D. nexus# erase startup-configuration
E. nexus# reboot
F. nexus# reload
G. nexus# shutdown
Correct Answer: AF
QUESTION 53
What is the minimum required command to enter global configuration mode on a Cisco Nexus switch?
A. nexus# con
B. nexus# configure
C. nexus# configure global
D. nexus# configure terminal

Correct Answer: A
QUESTION 54
Which option would you use to exit the Cisco Nexus Operating System interface configuration mode and return to the exec prompt?
A. nexus(config-if)#Ctrl-C nexus#
B. nexus(config-if)#Ctrl-Z
nexus#
C. nexus(config-if)#Ctrl-E nexus#
D. nexus(config-if)#exit nexus#

Correct Answer: B
QUESTION 55
What is the correct format of an access control list on a Cisco Nexus switch to deny unencrypted Web traffic from any source to destination host 10.10.1.110?
A. N5K-A(config)#ip access-list 101 N5K-A(config-acl)# deny tcp any host 10.10.1.110 eq 80
B. N5K-A(config)#access-list 101deny tcp any host 10.10.1.110 eq 80
C. N5K-A(config)#access-list 101deny tcp any host 10.10.1.110 eq 80 N5K-A(config)#access-list 101permit ip any any
D. N5K-A(config)# ip access-list 101 N5K-A(config-acl)# deny tcp any host 10.10.1.110 eq 80 N5K-A(config-acl)# permit ip any any

Correct Answer: D
QUESTION 56
What is the correct format of an access control list on a Cisco Nexus switch to deny FTP traffic from any source to destination host 10.10.1.110?
A. N5K-A(config)# ip access-list 101 N5K-A(config-acl)# deny tcp any host 10.10.1.110 eq ftp
B. N5K-A(config)#access-list 101deny tcp any host 10.10.1.110 eq ftp
C. N5K-A(config)#access-list 101deny tcp any host 10.10.1.110 eq ftp N5K-A(config)#access-list 101denyip any any
D. N5K-A(config)# ip access-list 101 N5K-A(config-acl)# denyudp any host 10.10.1.110 eq 21 N5K-A(config-acl)# permit ip any any
E. N5K-A(config)# ip access-list 101 N5K-A(config-acl)# deny tcp any host 10.10.1.110 eq 21 N5K-A(config-acl)# permit ip any any

Correct Answer: E
QUESTION 57
What is the correct format of an access control list on a Cisco Nexus switch to deny hosts on the 172.16.1.0/21 network from accessing HTTP proxy servers listening on port 8080?
A. N5K-A(config)# ip access-list 101 N5K-A(config-acl)# deny tcp 172.16.1.0 0.0.7.255 any eq 8080 N5K-A(config-acl)# permit ip any any
B. N5K-A(config)# ip access-list 101 N5K-A(config-acl)# deny tcp any 172.16.1.0 255.255.248.0 eq 8080 N5K-A(config-acl)# permit ip any any
C. N5K-A(config)#access-list 101 deny tcp172.16.1.0 0.0.15.255 eq 8080
D. N5K-A(config)# ip access-list 101 N5K-A(config-acl)# deny tcp any host 172.16.1.0/21 eq 8080

Correct Answer: A
QUESTION 58
What is the correct format of an access control list on a Cisco Nexus switch to only permit unencrypted Web traffic from the 172.16.1.0/25 network to destination host 10.10.1.110?
A. N5K-A(config)# ip access-list 101 N5K-A(config-acl)# permit tcp host 172.16.1.0/25 any eq 80
B. N5K-A(config)# ip access-list 101 N5K-A(config-acl)# permit tcp 172.16.1.0 255.255.255.128 any eq 80
C. N5K-A(config)# ip access-list 101 N5K-A(config-acl)# permit tcp 172.16.1.0/25 any eq 80
D. N5K-A(config)#access-list 101 permit tcp 172.16.1.0/25 0.0.0.128 eq 80
E. N5K-A(config)# ip access-list 101 N5K-A(config-acl)# permit tcp any 172.16.1.0 255.255.248.0 eq 80

Correct Answer: C
QUESTION 59
Which device forwards data based on the destination IP address?
A. repeater
B. bridge
C. switch
D. router
E. hub

Correct Answer: D
QUESTION 60
Which network topology is most closely associated with classical CSMA/CD?
A. bus
B. token passing bus
C. star
D. extended star
E. ring

Correct Answer: A
QUESTION 61
Which network topology is most closely associated with FDDI?
A. bus
B. token passing bus
C. star
D. extended star
E. ring
Correct Answer: E
QUESTION 62
Which layer of the OSI model is associated with Token Ring Media Access Control?
A. datagram
B. routing
C. network
D. data link
E. transport
F. transmission
G. session
Correct Answer: D QUESTION 63
When deploying 10BASE-2 Ethernet, which type of connector is used?
A. AUI
B. UTP
C. STP
D. BNC
E. RJ-11
F. RJ-45
G. ST
H. DC
Correct Answer: D
QUESTION 64
When deploying 10BASE-2 Ethernet, what is the maximum cable length?
A. 100 meters
B. 100 feet
C. 150 meters
D. 150 feet
E. 185 meters
F. 185 feet

Correct Answer: E
QUESTION 65
How many IP address ranges are specified in RFC 1918?
A. 1 in Class A, 2 in Class B, and 4 in Class C
B. 2 in Class A, 4 in Class B, and 8 in Class C
C. 4 in Class A, 8 in Class B, and 16 in Class C
D. 1 in Class A, 16 in Class B, and 256 in Class C
Correct Answer: D
QUESTION 66
What is required to allow devices that are using RFC 1918 addresses to communicate over the Internet?
A. A private to public VLAN must be defined on the Internet border device.
B. The Internet firewall must permit RFC 1918 addresses.
C. VLAN translation is required on the Internet border device.
D. Network address translation is required on the Internet border device.
Correct Answer: D
QUESTION 67
What is the addressing format of IPv6?
A. 48-bit dotted decimal
B. 48-bit colon-delimited hexadecimal
C. 64-bit dotted decimal
D. 64-bit colon-delimited hexadecimal
E. 128-bit dotted decimal
F. 128-bit colon-delimited hexadecimal

Correct Answer: F
QUESTION 68
Which statement describes the function of the OSI transport layer?
A. It segments data from the system of the sending host and reassembles the data into a data stream on the system of the receiving host.
B. It provides the connectivity and path selection between two host systems that may be located on geographically separated networks.
C. It defines how data is formatted for transmission and how access to the physical media is controlled.
D. It establishes, manages, and terminates sessions between two communicating hosts.

Correct Answer: A
QUESTION 69
Which transport protocol requires a three-way handshake to establish a new connection?
A. ARP
B. UDP
C. IP
D. TCP
Correct Answer: D
QUESTION 70
What is the subnet mask for the network 172.16.0.0/21?
A. 255.255.0.0
B. 255.255.255.240
C. 255.255.248.0
D. 255.255.255.248
E. 255.255.248.240
F. 255.255.255.0
Correct Answer: C
QUESTION 71
What is the dotted hexadecimal representation of the IP address 172.13.99.225?
A. AC.0D.63.E1
B. AB.63.99.D5
C. E2.1D.E1.66
D. BC.0C.C3.1F
E. CC.0D.F3.21
Correct Answer: A
QUESTION 72
What is the decimal value of the hexadecimal number 0x718?
A. 718
B. 1816
C. 2907

D. 3511
Correct Answer: B QUESTION 73
Which device is a multiport bridge?
A. Router
B. Switch
C. Gateway
D. Concentrator
Correct Answer: B
QUESTION 74
Which action will a router take if it does not know the destination MAC address of a host?
A. Flood the packet out of every port.
B. Drop the packet.
C. Send an ARP request.
D. Send a proxy ARP request.
E. Send an ICMP unreachable message back to the source.

Correct Answer: C
QUESTION 75
On which device would a VLAN be configured?
A. Router
B. Repeater
C. Hub
D. Switch
E. Gateway

Correct Answer: D
QUESTION 76
You are designing a network that provides FCoE, FabricPath, OTV, and Layer 3 functionalities. Which device can perform these functionalities?
A. Cisco Nexus 5500 Series Switches
B. Cisco Nexus 7000 Series Switches
C. Cisco Catalyst 6500 Series Switches
D. Cisco ASR 1001 Router

Correct Answer: B
QUESTION 77
A customer wants to connect to their SAN via Fibre Channel. Which two devices can be used to provide connectivity? (Choose two.)
A. Cisco MDS 9148 Multilayer Fabric Switch
B. Cisco Nexus 7010 Switch
C. Cisco Nexus 5548UP Switch
D. Cisco Catalyst 6509 Switch
E. Cisco Nexus 2248TP GE Fabric Extender
Correct Answer: AC
QUESTION 78
Which network device is used to identify and protect against unauthorized traffic and control access to legitimate business-critical data?
A. Stateful firewall
B. Stateless firewall
C. Router
D. Gateway
E. Switch

Correct Answer: A
QUESTION 79
Which two Cisco data center switches provide support for Virtual Extensible LAN and In- Service Software Upgrade and patching without any interruption in operation? (Choose two.)
A. Cisco Nexus 9396PX Switch
B. Cisco Nexus 5548 Switch
C. Cisco Nexus 9508 Switch
D. Cisco Nexus 6004 Switch
E. Cisco Nexus 3064x Switch

Correct Answer: AC
QUESTION 80
Which layer of the OSI model ensures that information sent from one system can be read by another system?
A. application layer
B. presentation layer
C. session layer
D. transport layer
E. network layer
F. data link layer
G: physical layer

Correct Answer: B
QUESTION 81
Which two options are groups of network protocols that are categorized into the following OSI layers: application, data link, network, and transport? (Choose two.)
A. FTP, LLDP, GRE, BGP
B. RDP, CDP, EIGRP, UDP
C. SSH, LLDP, ICMP, TCP
D. Telnet, ICMP, EIGRP, FTP
Correct Answer: BC
QUESTION 82
Which Cisco data center switch can support a 4-RU physical space requirement and also support FEX, Layer 2 and Layer 3, converged FCoE, and up to ninety-six 40-Gigabit Ethernet ports?
A. Cisco Nexus 5548 Switch
B. Cisco Nexus 5010 Switch
C. Cisco Nexus 1010 Switch
D. Cisco Nexus 7004 Switch
E. Cisco Nexus 6004 Switch

Correct Answer: E
QUESTION 83
Which device can provide FCoE connectivity?
A. Cisco 2901 Integrated Services Router
B. Cisco Nexus 2224TP Fabric Extender
C. Cisco Nexus 5548 Switch
D. Cisco ASA 5510 Firewall

Correct Answer: C
QUESTION 84
What are three characteristics of the Ethernet access method CSMA/CD? (Choose three.)
A. It allows many stations access to the same wire.
B. It provides segmentation of a LAN.
C. It allows a transmitting station to detect activity on the wire.
D. It allows for detection of collisions on the wire.
E. It provides broadcast capability on the wire.

Correct Answer: ACD
QUESTION 85
Which two MAC addresses are valid? (Choose two.)
A. 00:10:74:C9:CD:C0
B. 0010.CC71.4BF9.AE0E.AE0E
C. 00:10:F9:F9:CC:70:8D:80
D. 0010.E686.3ED4
E. 0010.68F7
Correct Answer: AD
QUESTION 86
What are three important factors when configuring VTP on the Cisco Nexus switching platform? (Choose three.)
A. VLAN 1 must be disabled on the trunk port in order for VTP to work properly.
B. The VDC administrator or network administrator must enable VTP on the device.
C. VTP is enabled on all trunk ports by default.
D. It does not matter which VDC you are working in when you configure VTP on the Cisco Nexus 7000.
E. For a device operating in VTP client mode, the password and domain name must be properly set.
F. In VTP server mode, the device will store VLAN information in bootflash.
G. Per device, VTP configuration is stored in a file named vtp.conf.
H. VTP pruning can be used on Cisco NX-OS devices.
Correct Answer: BFG
QUESTION 87
Which two statements about configuring VLANs on the Cisco Nexus 7000 platform are true? (Choose two.)
A. Software updates are disruptive to VLANs.
B. VLANs with the same number are unique to their VDC.
C. VLAN licensing is required for use.
D. To change VLAN information, the administrator must be at the switch (config) # prompt.

The Cisco contains more than 400 practice questions for the Cisco 640-911 exams,including simulation-based questions.Also contains hands-on exercises and a customized copy of the Cisco 640-911 exams network simulation software.