Cisco 640-822 PDF Dumps,The Most Recommended Cisco 640-822 Exam Questions Vce Latest Version PDF&VCE

Most accurate Cisco 640-822 practice test for you to free download.csci-scrc is also an authenticated IT certifications site that offer all the new questions and answers timely.Visit the site Flydumps.com to get free Cisco 640-822 VCE test engine and PDF.

QUESTION 138
Refer to the exhibit. Host P4S-A needs to send data to Host P4S-B. Which Layer 2 and Layer 3 destination addresses will be used to send the data from Host P4S-A to Host P4S-B?

A. 192.168.24.1 and 0007.0e56.ab2e
B. 192.168.60.5 and 0007.0e56.ab2e
C. 192.168.24.2 and 0007.0e84.acef
D. 192.168.60.5 and 0011.43da.2c98

Correct Answer: B
QUESTION 139
You are a network technician at P4S. Study the exhibit above carefully, as the first step in verifying a local host configuration, you perform the ipconfig/all command on a computer. Answer the following questions by using the results of the command. Which IP address represents the first server that this computer is trying to contact to resolve an Internet web site URL to an IP address?

A. 10.4.8.1
B. 10.69.2.87
C. 172.16.3.2
D. 172.16.236.1

Correct Answer: A
QUESTION 140
You are a network technician at P4S. Study the exhibit above carefully, as the first step in verifying a local host configuration, you perform the ipconfig/all command on a computer. Answer the following questions by using the results of the command. You can successfully ping to the IP address of the primary DNS server configured on the computer. What can you determine concerning the network?

A. The names of all of the routers in the path can be resolved by the configured DNS servers
B. The DNS server is able to resolve domain names to IP addresses.
C. The router with the address 172.16.3.2 has the correct route to the 10.0.0.0 network
D. The router with the address 172.16.236.1 has a route it can use to reach network of the DNS server

Correct Answer: D
QUESTION 141
Please study the exhibit, and answer the following question. Choose from the following the subnet broadcast address of the LAN connected to P4S-R.
A. 192.168.200.15
B. 192.168.200.31
C. 192.168.200.63
D. 192.168.200.127

Correct Answer: B
QUESTION 142
Choose from the following two statements that describe the IP address 10.16.3.65/23? (Choose two.)
A. The subnet address is 10.16.3.0 255.255.254.0.
B. The broadcast address of the subnet is 10.16.3.255 255.255.254.0.
C. The lowest host address in the subnet is 10.16.2.1 255.255.254.0.
D. The last valid host address in the subnet is 10.16.2.254 255.255.254.0

Correct Answer: BC
QUESTION 143
According to the following exhibit. A customer is not able to reach any web sites on the Internet, but others in the department have no problem. What most likely causes this problem?

A. A DHCP server address is not reachable by the PC.
B. IP routing is not enabled.
C. A DNS server address is not reachable by the PC.
D. NAT has not been configured on the router that connects to the Internet.

Correct Answer: C
QUESTION 144
Look at the following exhibit. P4SA should be able to telnet to switch P4S-SW by using router P4S-R for management purposes. To configure this connection successfully, what should be configured?

A. VLAN 1 on P4S-R
B. IP routing on P4S-SW
C. default gateway on P4S-SW
D. cross-over cable connecting P4S-SW and P4S-R

Correct Answer: C QUESTION 145
Two of the following describe private IP addresses. Which are them? (Choose two.)
A. a scheme to conserve public addresses
B. addresses that can be routed through the public Internet
C. addresses that cannot be routed through the public Internet
D. addresses chosen by a company to communicate with the Internet

Correct Answer: AC QUESTION 146
Which of the following is the subnet address of 172.16.159.159/22?
A. 172.16.0.0
B. 172.16.156.0
C. 172.16.128.0
D. 172.16.159.0

Correct Answer: B QUESTION 147
Tom works as a network technician for the P4S company. He is tasked to design a small network with redundancy according to the exhibit below which presents this design with all hosts configured in the same VLAN. What conclusions could be drawn from this design?

A. The connection between switches should be a trunk.
B. This design will function as intended.
C. The router will not accept the addressing scheme.
D. The router interfaces must be encapsulated with the 802.1Q protocol.

Correct Answer: C
QUESTION 148
The P4S company has required a 300-workstation expansion of its network. These workstations will be
installed in a single broadcast domain. However, each workstation needs to have its own
collision domain. The expansion will be as cost-effective as possible while still satisfying the requirements.
Which three options can correctly fulfill the request? (Choose three).

A. one IP subnet with a mask of 255.255.254.0
B. seven 48-port hubs
C. seven 48-port switches
D. one router interface

Correct Answer: ACD QUESTION 149
Which two statements best describe Cisco PAT implementation? (Choose two.)
A. requires at least two public addresses to operate
B. implemented to conserve public IP addresses
C. can only be used between a private network and the Internet
D. provides address connectivity between public and private addresses

Correct Answer: BD QUESTION 150
Look at the following exhibit. Some value should be displayed in Box 1 of the ipconfig output of host A. What is it?

A. 172.18.14.5
B. 172.18.14.6
C. 192.168.1.254
D. 192.168.1.10

Correct Answer: C
QUESTION 151
Look at the following exhibit. The internetwork uses subnets of the address 192.168.1.0 with a subnet
mask of 255.255.255.224. RIP version 1 is the routing protocol it uses.
Which of the following
address could be assigned to the FastEthernet interface on P4S-RA?
A. 192.168.1.31
B. 192.168.1.64
C. 192.168.1.190
D. 192.168.1.127

Correct Answer: C
QUESTION 152
Based on the following exhibit. The host in P4S-R2 sends a request for an HTML document to the server in P4S-R3. Which of the following addresses will be the source IP address of the packet as it leaves the P4S-R2?

A. 10.1.2.8
B. 10.1.0.6
C. 10.1.0.14
D. 10.1.1.16
Correct Answer: D

We help you do exactly that with our high quality Cisco 640-822 Certification using the above training materials.Regardless of whichever computer you have, you just need to download one of the many Cisco 640-822 PDF readers that are available for free.